Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Forest Hills Homeowners
Most chimney problems in Forest Hills announce themselves quietly. A hairline crack in a flue tile, a crown that’s separated by a fraction of an inch, a nest packed into the smoke chamber behind a damper that still opens and closes fine. None of that shows up from the living room, and none of it gets caught by a sweep that only brushes and leaves. Our inspection service exists for exactly that gap: a documented, evidence-based look at the whole chimney system, from the cap down to the firebox, so you know what you have before it becomes a repair. Our technicians have up to 8 years of experience and work with professional-grade trade materials from HeatShield and Olympia Chimney, which means a problem we find is a problem we can usually fix in the same visit. Call (855) 410-4917 to book a Forest Hills inspection. We answer 24/7.
Key Takeaways
- An inspection is a documented assessment, not a sweep. You get findings, photos, and a clear recommendation.
- Level 1, Level 2, and Level 3 inspections cover different scopes. Real estate transactions usually need Level 2.
- Camera inspection and flue inspection let us see the inside of the liner without guessing.
- Nothing gets recommended without evidence you can look at yourself.
- Estimates are free, and the written estimate sets the final price.
What Our Chimney Inspection Service Includes
We treat inspection as its own service, not a checkbox on a sweep invoice. That distinction matters most when you’re buying or selling a house in Forest Hills, or when a previous sweep told you something needed replacing and you had no way to verify it. Each level below has a defined scope, and we tell you upfront which one your situation calls for.
Level 1 Inspection
A Level 1 inspection is the baseline check you’d want as part of an annual sweep or after a season of regular burning. It covers all readily accessible parts of the chimney and venting system: the firebox, damper, smoke chamber, flue from the top and bottom where reachable, cap, crown, and the visible exterior. We’re looking for clearances, blockage, deterioration, and anything that reads wrong. If everything checks out, you get that in writing, which is just as useful as finding a problem.
Level 2 Inspection
A Level 2 inspection goes further into accessible areas that a Level 1 doesn’t reach, and it’s the standard most real estate transactions call for. It applies after a chimney fire, after a change in fuel or appliance, after an earthquake or major storm event, or when you’ve moved into a home with an unknown chimney history. We use video scanning to examine the flue interior and document what we find, then hand you a report you can act on or hand to a buyer.
Level 3 Inspection
A Level 3 inspection is diagnostic and targeted. It’s what we recommend when a Level 1 or Level 2 turns up something that can’t be assessed without opening up part of the chimney structure, such as suspected damage behind a wall or above a roofline. We explain what needs to be accessed and why before anything gets opened. This is the least common level, and we only recommend it when the evidence points there.
Camera Inspection
Camera inspection puts a video scope inside the flue so we can see the liner’s actual condition rather than inferring it. It’s how we confirm cracked tiles, gaps at joints, heavy glazing, or an offset that’s trapping creosote. If you’ve been told you need a full reline, this is the step that either proves it or rules it out. You see the footage with us.
Flue Inspection
Flue inspection focuses on the passage your smoke actually travels: sizing, condition, blockage, and whether the liner matches the appliance connected to it. An oversized flue on a modern insert runs cold and builds creosote faster than it should. A flue that’s too small for a converted appliance won’t draft properly no matter how often it’s swept. We check the fit, not just the cleanliness.
Real Estate Inspection
Real estate inspection is a documented chimney assessment timed to a purchase or sale, and it’s the service new buyers in Forest Hills ask for most. We inspect the full system, photograph the findings, and put the results in a report that a buyer, seller, or attorney can read without a translator. It tells you what the chimney needs and, just as importantly, what it doesn’t.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Brands We Service for Chimney Inspection
Our inspection work is tied to the materials we actually install and repair with, because that’s what lets us assess a system accurately instead of just describing symptoms. We work with HeatShield, the resurfacing system used to restore deteriorated flue tile without tearing out the chimney, so when we inspect a flue we know precisely what HeatShield can and can’t correct. We also work with Olympia Chimney flexible liner systems, which means an inspection finding a compromised liner leads to a real solution rather than a referral to someone else.
On the exterior side, we install and service caps and covers from Gelco and Famco. Knowing those products from the inside out changes how we read a crown, a cap, or a top-sealing damper during an inspection: we can tell the difference between normal wear and a cap that was the wrong fit from the start. Whether your chimney carries Gelco, Famco, HeatShield, Olympia Chimney, or any other make, we can inspect it and tell you honestly where it stands.
Signs You Need Chimney Inspection Right Now
- You’ve had a chimney fire, even a small one. Many chimney fires go out on their own and the homeowner never calls the fire department. The damage they leave behind in the flue tiles doesn’t heal, and only a camera inspection finds it.
- You smell smoke in the room when the fireplace isn’t lit. That’s a draft or pressure problem pulling air down the flue, and it can also mean the flue is blocked. It’s worth diagnosing before the heating season starts rather than after.
- There’s water staining on the chimney breast or ceiling near it. Moisture getting past a failed crown or cap is the most common cause of chimney deterioration we see. Catching it early keeps a cap-and-crown job from turning into masonry repair.
- You’re buying or selling a home in Forest Hills. A chimney with unknown history is a liability in a transaction. A Level 2 inspection with photos resolves it either way.
- You’ve changed what you burn or what’s connected. Swapping a wood appliance for gas, or adding an insert, changes the venting requirements. The flue needs to be checked against the new appliance.
Our Chimney Inspection Process – Step by Step
- 1
We ask what’s going on before we arrive. What you burn, how often, whether there’s been a chimney fire, and what prompted the call. That shapes which inspection level we bring and how long to set aside.
- 2
We inspect the accessible interior first. Firebox, damper, smoke chamber, and the flue from below where reachable. We note clearances and look for obstruction before moving up.
- 3
We go to the roof and inspect from the top down. Cap, crown, flashing, and the flue opening. Checking from both ends catches things a single vantage point misses, including caps that are venting poorly or have shifted.
- 4
We run a camera through the flue when the scope calls for it. The footage is the evidence. We show you cracked tiles, joint gaps, or heavy glazing on screen rather than describing them in vague terms.
- 5
We write it up and walk you through it. You get the findings, photos, and a clear recommendation with the repairs we’d prioritize and the items that can safely wait. Nothing is added to a work order without your say-so.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Inspection Cost in Forest Hills?
Chimney inspection in Forest Hills typically runs $125 – $275 for a Level 1, $225 – $450 for a Level 2 with camera work, and $400 – $800 or more for a Level 3 that requires opening part of the structure. A standalone camera inspection of the flue usually falls in the $150 – $350 range. These are typical estimates for this market; the written estimate you receive sets the final price.
| Inspection Type | Typical Range | What Drives the Price |
|---|---|---|
| Level 1 | $125 – $275 | Access, chimney height, number of flues |
| Level 2 (with camera) | $225 – $450 | Camera scope, roof access, report detail |
| Camera / flue inspection only | $150 – $350 | Flue length, liner type, obstruction |
| Level 3 (targeted) | $400 – $800+ | What has to be opened and restored |
| Real estate inspection | Quoted per job | Report scope, timeline, documentation |
What affects the price: the number of flues, whether the chimney has a cap that needs removing, roof pitch and height, and whether heavy creosote or a blockage has to be worked around. How to avoid overpaying is simple. Ask which inspection level you’re getting and why, and ask to see the camera footage. If a company recommends a liner replacement without showing you the flue interior, get a second opinion. Nothing we recommend comes without evidence you can review yourself, and we’ll say plainly when work can wait. Our chimney inspection is quoted per job with a free estimate.
Chimney Inspection Near Forest Hills – Our Service Area
We inspect chimneys across Forest Hills and the surrounding neighborhoods, including Rego Park, Kew Gardens, and the communities just east of us. Homeowners in Manhasset Hills, New Hyde Park, and North New Hyde Park book us for the same services, and our chimney inspection and chimney inspection pages cover those areas in more detail. Scheduling is booked per job, so we’ll give you a clear window when you call rather than an hourly promise we can’t keep.
Serving Forest Hills, NY – Our Local Coverage Area
We serve Forest Hills and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Chimney Inspection in Forest Hills
A chimney inspection is a documented assessment of your entire chimney and venting system, not a cleaning. It covers the firebox, damper, flue, cap, crown, and exterior, and it tells you what condition the system is in and what, if anything, needs repair. It’s different from a sweep, which removes creosote and debris. Call (855) 410-4917 for an exact quote – estimates are free.
A Level 1 inspection usually takes 30 to 45 minutes, and a Level 2 with camera work runs closer to an hour. A Level 3 or a real estate inspection takes longer because of the documentation and any opening of the structure involved. We’ll tell you the expected time when we book so you can plan around it.
Chimney inspection in Forest Hills typically runs $125 – $275 for a Level 1 and $225 – $450 for a Level 2 with camera. Level 3 work that requires opening the structure can run $400 – $800 or more. The written estimate sets the final price, and estimates are free. Call (855) 410-4917 for an exact quote.
Yes. We work with HeatShield resurfacing and Olympia Chimney flexible liner systems, so we inspect those installations with a working knowledge of how they’re built and where they tend to wear. Whether your liner is HeatShield, Olympia, or another make entirely, we can assess it and tell you where it stands.
Same-day inspection is often possible when you call early in the day. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a call then gets booked into the next opening. Call (855) 410-4917 and we’ll give you a real window.
Our work is backed by a satisfaction guarantee, and any repair or installation we recommend and perform carries the manufacturer’s coverage on the materials we use. If the inspection finds nothing wrong, that’s the report you get in writing. Call (855) 410-4917 with questions about coverage on a specific job.
Clear the area in front of the fireplace, make sure we can get to the roof access, and don’t burn for at least 24 hours before the visit. Let us know if you’ve had a chimney fire or noticed smoke backing into the room. That’s enough. Call (855) 410-4917 to schedule and we’ll confirm anything specific to your chimney.
Schedule Your Chimney Inspection Service in Forest Hills Today
An inspection is the cheapest part of chimney ownership and the one that prevents the expensive parts. You’ll get a documented assessment, camera evidence where it applies, and an honest answer about what your chimney needs and what can wait. Our technicians have up to 8 years of experience and work with the whole system, not just the visible soot. Call (855) 410-4917 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also start with our Chimney Sweep Forest Hills page or book chimney repair if the inspection has already been done.
Written by the team at Chimney Sweep Forest Hills.