Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Manhasset
If your chimney crown is cracked at the flue seams or your cap is a single old galvanized model sitting over one flue while the rest of the stack stays open, we can help. We’re Chimney Sweep Forest Hills, and we work on the full chimney system in Manhasset – not just the visible soot. Our technicians have up to 8 years of experience, and they know what a pre-war center-hall Colonial stack looks like from the roof. Call (855) 410-4917 for a free estimate; we answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Manhasset Homeowners Call Chimney Sweep Forest Hills for Chimney Cap & Crown
Manhasset homeowners tend to have more than one fireplace, and often more than one flue on a single masonry stack. That changes the job. A house with four or five flues needs a cap sized to the actual stack, a crown that drains properly at every opening, and someone who can document what each flue looks like before anything gets fitted over it.
We work with professional-grade materials from HeatShield, Gelco, Olympia Chimney and Famco – the same products certified chimney professionals specify, not the generic hardware-store caps that fail first. Our inspection service is a standalone offering, not a checkbox on a sweep invoice, which matters when the village building department wants clearances and liner condition documented.
We serve Manhasset and the surrounding villages, including Manhasset, and our cap and crown work runs alongside our full chimney cap & crown service scope. You get a flat-price sweep agreed before booking, a camera inspection and photo report included, and a satisfaction guarantee.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Manhasset
Cap Installation
On a large masonry stack, a proper cap means one sized to the full footprint, not a single unit dropped over one opening. We install Gelco and Famco caps with stainless mesh sized to your flues, which keeps the mature tree canopy over Manhasset from dropping debris into the smoke chamber and closes off access for nesting squirrels between heating seasons.

Cap Replacement
Many Manhasset chimneys still carry a single-flue cap from an old gas conversion or insert, leaving the other flues on the stack open to weather and animals. Replacing it with a multi-flue cap sized to the actual stack solves that in one visit, and we photograph the fit so you can see what changed.

Crown Repair
Shallow mortar-wash crowns poured decades ago crack along the flue openings, and once water gets behind them, the damp North Shore freeze-thaw cycle spalls the brick course beneath before anyone notices. We rebuild crowns with proper slope and overhang so water sheds off the stack instead of sitting on it, and we document the repair for building-department review.

Crown Coating
Where a crown is still structurally sound, a HeatShield crown coating can seal the surface and bridge hairline cracks without demolition. It’s the right call on a 1930s Colonial crown that’s cracked but not failing, and we’ll tell you plainly when coating covers the problem and when the crown needs rebuilding.
Multi-Flue Cap and Custom Cap
Manhasset’s larger properties often carry custom-sized caps for irregular stacks – multiple flues at different heights, offsets, and masonry surrounds. We measure the stack, have a cap fabricated to fit, and install it with the clearances your flues actually require. A custom cap also keeps the chimney’s exterior proportions intact on brick-and-stucco Tudors, which matters on the older village streets.
How Cap and Crown Work Actually Goes on a Multi-Flue Manhasset Stack
The local insight here is one you won’t find on a generic cap page: on the estate lots north of Northern Boulevard, the rear fireplaces added to 1920s-1950s Colonials and Tudors in the 1950s often sit on flues that were never given a terra-cotta liner. Cap-and-crown work there starts with confirming the flue is lined at all – a check that rarely comes up in neighboring towns where most chimneys are post-war builds with factory liners. Fitting a new cap over an unlined flue without noting it is how a chimney fire starts.
On a large center-hall Colonial with four or five flues, the crown is typically the first thing to go. A shallow mortar wash poured decades ago cracks along the flue openings, water gets behind it, and the freeze-thaw cycle spalls the brick below while the cap – often a single generic galvanized model over one flue – leaves the rest open to the mature tree canopy and nesting squirrels. A qualified sweep will run a Level 2 inspection, photograph the crown and flashing, check each flue for a liner (rear 1950s additions sometimes have none), then rebuild or coat the crown and fit a custom multi-flue cap sized to the actual stack rather than patching over the crack.
Trusted Brands We Service in Manhasset
We work with a curated portfolio of professional-grade chimney industry brands: HeatShield for liner resurfacing and crown coating, Gelco and Famco for caps and covers, and Olympia Chimney for flexible liner systems where a flue needs relining. These are the products certified chimney professionals specify, and they’re not available to general handymen. We don’t claim to stock parts locally; we specify the right product for your stack and order it, which keeps the turnaround tight without cutting corners on fit. From cap to firebox – one company, one call.
Common Chimney Cap & Crown Problems We See in Manhasset Homes
- Cracked mortar-wash crowns on pre-war stacks. Shallow original crowns crack at the flue seams, and the freeze-thaw cycle spalls the brick beneath before anyone notices. That’s why we photograph the crown on every inspection rather than after the damage shows.
- Single-flue caps after a gas conversion. When an insert or gas appliance goes in, an old single-flue cap often stays, leaving the other flues on a multi-flue masonry chimney open to canopy debris and animal nesting between heating seasons.
- Unlined rear additions. Rear 1950s fireplace additions off Plandome Road often carry unlined flues, so a new cap and crown get fitted over a stack whose draft and clearances were never documented. We check the liner before we cap.
- Spalled brick under a failing crown. Once water gets behind a shallow crown, the brick below starts to shed faces on the long, damp North Shore winters. Caught early, it’s a crown rebuild; caught late, it’s structural masonry repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in Manhasset, NY
Pricing here reflects the larger masonry stacks and pre-war housing stock, not a standard suburban single-flue job. A typical crown repair in Manhasset runs $600-$1,500. A crown coating on a sound crown runs $450-$1,100. Cap installation runs $350-$1,500 depending on size. A multi-flue cap runs $900-$2,000. A custom-fabricated cap runs $1,400-$3,500. These are typical estimated ranges for the Manhasset market; the written estimate sets the final price. A compound chimney with four flues and a custom cap will land at the higher end; a single-flue replacement will land at the lower end. If the inspection turns up an unlined rear flue, we’ll tell you what it costs to reline – and when the cap and crown work can safely wait. Call (855) 410-4917 for a free estimate.
We Also Serve Cities Near Manhasset
We also work in North Hills, Manhasset Hills, North New Hyde Park and New Hyde Park – the same pre-war and post-war housing stock, the same damp winters, the same canopy debris. If your property sits just over the line, we can still get eyes on the stack. Whether the job is a multi-flue cap, a crown rebuild or a custom cap sized to an irregular stack, one company can handle it from sweep through repair.
Serving Manhasset, NY – Our Local Coverage Area
We serve Manhasset and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Manhasset
Yes, a Level 2 inspection is the right standard for a multi-fireplace masonry stack. It documents each flue’s condition, liner status, clearances and the crown and flashing above, which is what the village building department will want to see before work proceeds. We photograph the crown and flashing so you can see what we’re seeing. Call (855) 410-4917 for a free estimate.
The only reliable way to know is a camera inspection of the flue. On larger properties in Manhasset, the rear fireplaces added to 1920s-1950s Colonials and Tudors in the 1950s often sit on flues that were never given a terra-cotta liner, and you can’t tell from looking down from the roof. We run the camera and show you the footage. Call (855) 410-4917 and we’ll book the sweep and the inspection together.
Because it’s most likely a shallow original mortar-wash crown that was never designed for the damp North Shore freeze-thaw cycle. Water sits in the shallow wash, cracks along the flue seams, and the cycle repeats. A proper crown repair with real slope and overhang solves it; a patch alone won’t. Call (855) 410-4917 for a free estimate on rebuilding rather than re-patching.
On a multi-flue masonry stack, usually yes. Off-the-shelf caps fit one flue and leave the rest of the stack open, which is exactly how canopy debris and squirrels get in. A custom cap fabricated to the actual stack fits the full footprint and vents each flue properly. On a single-flue replacement, a standard cap is fine. Call (855) 410-4917 and we’ll tell you which yours needs.
We check whether the cap covers the whole stack or only the active flue, whether the crown drains at every opening, and whether the original flues are still open, capped or abandoned. Gas conversions and inserts often leave the other flues unprotected and their clearances undocumented – which matters for safe operation and for building-department records. We document all of it in the photo report. Call (855) 410-4917 for a free estimate.
Book Your Manhasset Cap and Crown Work
If you’re in Manhasset and your crown is cracking, your cap is a single old model over a multi-flue stack, or you don’t know whether your rear flue was ever lined, start with a sweep and a Level 2 inspection. You get a flat-price sweep agreed before booking, a camera inspection and photo report included, and a satisfaction guarantee. From cap to firebox – one company, one call. The written estimate sets the final price, and we’ll tell you when the work can safely wait.
Call (855) 410-4917 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Forest Hills.