Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across New Hyde Park
Water almost always gets into a New Hyde Park chimney through the top, not the firebox. A spalled crown or a missing cap lets rain straight into the flue, and on the older brick chimneys common here that moisture works on mortar joints all winter. We handle cap and crown work across New Hyde Park, from the blocks near the Covert Avenue and Jericho Turnpike corner out toward North New Hyde Park, and we bring camera equipment so you can see the problem before anyone quotes a repair.
A typical cap replacement is quick. A full crown rebuild takes most of a day on these homes. Either way, you get a written estimate before we start. Call (855) 410-4917.
Why New Hyde Park Homeowners Call Chimney Sweep Forest Hills for Chimney Cap & Crown
Most of what we find in New Hyde Park isn’t a new problem. It’s a 1948 crown that’s been patched twice and is still cracked, or a cap that a general handyman bolted down without checking the flue underneath. When we quote crown repair, the camera footage comes with it. If the flue tiles are sound and the crack is surface-level, we say so. If there’s a gap in the liner, you’ll see it on the screen yourself, not just hear about it in a sales pitch.
We keep a tight service window for New Hyde Park because the town sits close to our Forest Hills base along the Long Island Rail Road corridor. When you call, we can usually book a sweep and cap assessment into the next opening, Sunday through Friday, 7am to 7pm. If you have a trip planned or a home inspection on the calendar, tell us. We’ll work the cap and crown into that visit so you’re not calling a second contractor for the fireplace.
Our technicians have up to 8 years of experience. They’re trained on Gelco and Famco caps and HeatShield crown coatings, which means the fix we recommend is one we’re qualified to install, not the one that fits the truck. And if the cap is fine and the crown isn’t, we’ll tell you that too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in New Hyde Park
Cap and crown work covers the two parts of a chimney that take the first hit from weather. Here’s what each service involves on the homes we see around New Hyde Park.
Cap Installation in New Hyde Park
A properly fitted cap keeps out rain, squirrels, and the starlings that nest in the stubby chimneys on these tight lots. On the post-war capes and colonials we see, the chimney often sits low and close to the neighboring roofline, so the cap needs to clear the flue pipes with enough space to vent without trapping smoke. We size the cap to the actual flue count, not a one-size-fits-most model.

Cap Replacement in New Hyde Park
Original caps from the 1940s and 1950s were often galvanized steel that’s now rusting through at the seams, or aluminum that’s been bent by wind and debris. On the narrow blocks of New Hyde Park, where neighboring knockdown-rebuilds create turbulence, stock caps loosen faster than they would on an open lot. If your cap is rattling, rusted, or missing its screen, a replacement is usually a same-day job once we’ve checked what’s underneath.

Crown Repair in New Hyde Park
The crown is the concrete or mortar slab on top of the chimney that sheds water away from the flue. When it spalls and cracks, water runs down the clay tile and into the mortar joints. We remove the failing crown and pour a new one with the correct slope and overhang so it actually sheds water instead of pooling it. On many 11040 homes, that’s the repair that finally stops the drip.

Crown Coating in New Hyde Park
Not every crown needs to be rebuilt. If the spalling is minor and the crown is still structurally sound, a flexible crown coating can seal hairline cracks before they widen through another freeze-thaw winter. We use HeatShield coating systems, which are made for this kind of repair. We’ll only recommend coating if the crown can take it, and we’ll tell you when a full rebuild is the better long-term move.
Trusted Brands We Service in New Hyde Park
We work with professional-grade chimney industry brands: Gelco and Famco for caps and covers, HeatShield for crown and flue resurfacing, and Olympia Chimney for liner components when a cap job uncovers a flue problem. These aren’t products available at a big-box store, which means the cap we install is built to last on a New Hyde Park rooftop, not a season. We don’t claim to stock parts locally. What we do promise is a fast turnaround: once you approve the written estimate, we order the right cap for your flue count and book the install. If a multi-flue cap or a custom size is needed, we’ll confirm the lead time up front, not after you’ve waited two weeks.
Common Chimney Cap & Crown Problems We See in New Hyde Park Homes
- Spalled brick crowns on 1920s – 1950s homes. Coastal freeze-thaw cycling works on these older crowns every winter. Once the mortar face flakes off, cracks open and water finds the clay tile underneath.
- Loose or rusted stock caps on stubby chimneys. New Hyde Park’s tight lots and neighboring rebuilds create wind turbulence. Stock caps that fit the flue at install can loosen or corrode within a few seasons.
- Debris and animal nests in unlined or oversized flues. A cap with the right screen keeps squirrels and birds out of the wide oil-era flues that were never sized for a modern appliance.
- Cap work hiding a flue problem. On many homes here, a cap replacement turns into a camera inspection that reveals gaps or missing liner sections in a flue now serving a wood insert. That’s a liner job before the cap goes back on.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Cap & Crown in New Hyde Park, NY
Here’s what cap and crown work typically runs in the New Hyde Park market. These are estimates; your written quote sets the final price.
- Cap installation (single-flue): $180 – $450
- Cap replacement: $150 – $400
- Multi-flue cap: $400 – $900
- Custom cap: $600 – $1,400
- Crown repair (rebuild with correct slope and overhang): $350 – $900
- Crown coating (minor cracks, structurally sound crown): $200 – $500
The final number depends on flue count, roof pitch, how much of the old crown has to come off, and whether the camera inspection uncovers a liner problem underneath. We do the inspection first and quote from what we see, with photos included. Nothing gets added without camera evidence you can review. Estimates are free.
We Also Serve Cities Near New Hyde Park
Our chimney cap & crown work covers New Hyde Park and the surrounding towns along this stretch of Nassau County: Garden City Park, Manhasset Hills, North New Hyde Park, and Franklin Square. The housing here is similar across those lines, so the same camera-first approach applies. We know New Hyde Park well and read these rooftops the same way whether the address is in the village or just outside it.
Serving New Hyde Park, NY – Our Local Coverage Area
We serve New Hyde Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in New Hyde Park
Not without checking the flue first. Many chimneys on these blocks were built with a single oil flue and no dedicated wood flue, so the “chimney” your insert vents into may actually be the furnace flue, which needs a full stainless liner before the first fire. A cap alone won’t fix flue sizing or draft. A camera inspection shows you exactly what’s up there before any cap goes on. Call (855) 410-4917 for a free estimate.
Because the repair often sealed the crack without addressing the slope or the freeze-thaw cycle that caused it. Long Island winters push water into any crack, then expansion splits it wider each season. A patch on a flat or poorly sloped crown will fail again. The durable fix is a new poured crown with the right slope and overhang, not another coat of sealant over a bad slab. We’ll show you the difference from the roof.
Check for rust-through, lost screens, a cap that’s bent or sitting crooked, or gaps where it meets the flue pipe. If any of those are present, cleaning won’t fix it. A cap that’s intact with a clear screen usually just needs the debris swept off. We assess the cap, the screen, and the crown in one visit so you get the full picture instead of a cleaning quote that misses the real problem.
Crown repair rebuilds the crown. Crown coating seals minor cracks on a crown that’s still structurally sound. The choice comes down to how much spalling there is and whether the crown can still shed water. Coating is a real fix for hairline cracks, not a mask over a failing slab. We’ll recommend coating only when the crown underneath can handle it, and full repair when it can’t.
Sometimes, but not usually on its own. A cap with the wrong clearance can make a draft worse by trapping exhaust, while a properly vented cap protects the flue without restricting airflow. On the older colonials here, draft problems more often trace back to an oversized oil-era flue serving a smaller wood appliance. A camera inspection tells you which problem you actually have. Call (855) 410-4917 for a free estimate.
Get a Cap and Crown Estimate in New Hyde Park
If your crown is cracking, your cap is rusted, or you’ve added a wood insert and want to know what’s really underneath the cap, call us. We answer 24/7, and we dispatch Sunday through Friday, 7am to 7pm. Every quote starts with a camera inspection and photos you can review. Call (855) 410-4917 for a free estimate.
Written by the team at Chimney Sweep Forest Hills.