Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Elmhurst
If your cap is rusted through or your crown has cracked along the flue line, we can help. We handle chimney cap and crown work on the brick rowhouses and low-rise apartment buildings that fill Elmhurst, and we know the housing stock here rewards a careful look before anyone quotes a repair. Cap and crown problems are usually water problems, and water in an old Elmhurst chimney moves fast. Call (855) 410-4917 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Elmhurst Homeowners Call Chimney Sweep Forest Hills for Chimney Cap & Crown
We’re a chimney and fireplace specialty contractor, not a general handyman outfit that adds a cap to the list. Our technicians have up to 8 years of experience, and they work with professional-grade brands like Gelco, Famco, and Copperfield because those are the products designed to survive decades on a New York roof. We can work with your insurer and we agree a flat price before we book, so you know the number before anyone climbs up.
Around Elmhurst, that matters more than it does in the suburbs. A technician working here quickly learns that a “chimney” call often means a flue shared with a neighbor’s unit. We document the shared stack and any unlined sections before we sweep or repair anything, and we don’t recommend relining or masonry work without camera evidence you can look at yourself. That’s the whole approach: your report tells you what your chimney needs, and what it doesn’t.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Elmhurst
Cap and crown work is one category of the five we cover, alongside sweeping, inspection, structural repair, and fireplace repair. Here’s what we do most often on Elmhurst roofs.
Cap Installation
A properly sized cap keeps rain, birds, and squirrels out of the flue and keeps sparks off the roof. On the early-20th-century brick rowhouses common around Elmhurst, we usually measure first and fit second, because a store-bought cap almost never matches the flue count or the stack width. Installation typically runs $180 – $420 depending on flue size and how many flues need covering.

Cap Replacement
Most caps we replace in Elmhurst are galvanized units that rusted out after years of humid summers and wet winters. A rusted cap lets water pour straight into an unlined clay-tile flue, which is the fastest way to spall the crown and mortar joints. Replacement usually runs $180 – $450, and we’ll tell you plainly whether your existing cap can simply be re-secured instead.

Crown Repair
The crown is the concrete or mortar cap at the top of the chimney that sheds water away from the masonry. When freeze-thaw cycles crack it, water gets behind the crown, spalls the brick, and eventually separates the crown from the flue tile. Crown repair in Elmhurst typically runs $350 – $900, depending on how much of the crown has failed and whether the top courses of brick need rebuilding.

Crown Coating
A flexible crown coating is the option between “leave it” and “rebuild it.” It seals hairline cracks and minor surface failures before they turn into a real break, and it moves with the masonry instead of cracking away from it. Crown coating usually runs $300 – $700 in Elmhurst. The key is diagnosis: coating is right for a surface crack and wrong for a crown that has already pulled away from the flue.
Multi-Flue Cap
Elmhurst’s shared stacks between adjacent units are why multi-flue cap work here rarely looks like a single-family job. One roof opening can serve two addresses, so a multi-flue cap needs to be sized and fitted for every flue under it, with access and documentation coordinated with the neighbor. Call that $350 – $800, depending on the number of flues and the configuration.
Custom Cap
On older Elmhurst chimneys with unusual stack dimensions or a shared chase, an off-the-shelf cap leaves gaps. A custom cap is fabricated to the exact footprint, which is often the only way to get a real seal on a 1920s – 1940s stack. Custom work usually runs $500 – $1,200. We’ll tell you honestly when a standard size will do the job just as well.
Trusted Brands We Service in Elmhurst
We work with a curated set of professional-trade chimney brands, and cap and crown work draws on a few of them directly. Gelco and Famco cover the caps and venting protection side; Copperfield and Olympia Chimney come into play when a cap job turns into a flue question. These products are specified by certified chimney professionals, and we use them where they fit the job. Because we work the whole system rather than just the visible soot, we can go from cap to flue without handing you to a second contractor. Our technicians have up to 8 years of experience with these materials.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Elmhurst Homes
The failure patterns in Elmhurst repeat because the housing stock repeats. Here’s what our reports usually flag:
- Crown cracking from freeze-thaw cycles. Elmhurst’s winters push water into hairline cracks, then freeze and widen them. The result is spalled brick and a crown that separates from the flue tile.
- Missing or undersized caps on shared stacks. A shared stack with no cap on one side lets rain and animals into an unlined flue, which worsens draft and builds first-degree creosote that can be removed before it glazes.
- Original coal- or oil-era chimneys now venting gas or oil appliances. Many Elmhurst chimneys were built for coal or oil and later converted, and the existing flue is undersized for the appliance. A new cap or crown alone won’t fix that venting problem.
- Parging and flue-tile failures in converted chimneys. Evidence of failed parging and cracked flue tile shows up routinely, which is why integrity checks are standard before any cap goes on.
Pricing for Chimney Cap & Crown in Elmhurst, NY
Here’s the honest range for Elmhurst, based on what the housing stock actually requires. Every price below is a typical estimate for this market, and the written estimate we provide sets the final number.
| Service | Typical estimate in Elmhurst |
|---|---|
| Cap installation (single flue) | $180 – $420 |
| Cap replacement | $180 – $450 |
| Crown repair | $350 – $900 |
| Crown coating | $300 – $700 |
| Multi-flue cap (shared stack) | $350 – $800 |
| Custom cap | $500 – $1,200 |
| Level 2 inspection with camera documentation | $250 – $550 |
What moves you inside those ranges: the number of flues under one cap, whether the crown has separated from the flue tile, and whether access to a shared stack needs coordination with a neighbor. The inspection price is separate because we’d rather document the problem before quoting the fix. The estimate is free and the price is agreed before we book. Call (855) 410-4917.
We Also Serve Cities Near Elmhurst
We regularly work the surrounding neighborhoods: Rego Park, Corona, Middle Village, and Forest Hills. The housing stock shifts from block to block, so if your chimney sits on a similar rowhouse or low-rise walk-up, we’ll bring the same documentation-first approach to it. Our team handles the full chimney system from cap to firebox, and we don’t recommend a repair we can’t show you evidence for. Call (855) 410-4917 to book.
Serving Elmhurst, NY – Our Local Coverage Area
We serve Elmhurst and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Elmhurst
You usually need cooperation, not always written permission. If your flue shares a stack with the adjacent unit, a new multi-flue cap covers both flues, so access and documentation need agreement from the neighbor before the job is booked. We walk through the shared-stack configuration with camera evidence first, so both sides can see exactly what the cap has to cover. Call (855) 410-4917 for an exact quote, and we’ll explain what the coordination involves before you commit.
Look for visible cracks along the crown, spalled brick just below it, or chunks of concrete on the roof after a freeze. In Elmhurst, the freeze-thaw cycle makes this the most common crown failure we find. If the crown has separated from the flue tile, coating won’t hold it and the crown needs real repair. Call (855) 410-4917 to book an inspection and we’ll document the crown with photos you can see.
The cap sits at the top of the flue opening and keeps rain, animals, and sparks out; the crown is the concrete or mortar surface that sheds water away from the masonry. In an Elmhurst rowhouse, both matter: a missing cap floods an unlined flue, and a cracked crown lets water into the brick. We inspect both before quoting either, and we tell you when one is fine and doesn’t need work. Call (855) 410-4917 for a free estimate.
Not on its own. A cap helps with draft by keeping rain and debris out, but an unlined flue with an appliance venting into it usually needs a properly sized liner, not just a cap. Our technicians can document the flue interior with a camera and show you what’s there; without that evidence we won’t recommend relining or masonry work. We work with HeatShield resurfacing and DuraFlex and Olympia Chimney liner systems when a flue genuinely needs one. Call (855) 410-4917 to talk it through.
Because the stack footprint often doesn’t match a standard size. The older brick chimneys in Elmhurst, many built for coal or oil and later converted, frequently have irregular stack dimensions or a shared chase that leaves gaps around an off-the-shelf cap. A custom cap is fabricated to the exact footprint, which is the only way to get a real seal. We’ll tell you honestly when a standard size will work. Call (855) 410-4917 for an exact quote, and the estimate is free.
If your cap is rusted through or your crown is cracking, we’ll document it with camera evidence before anyone quotes a repair. That’s the job in Elmhurst: diagnose the whole stack, coordinate on shared flues where they exist, and recommend only what the evidence supports. Call (855) 410-4917 for a free estimate.
Written by the team at Chimney Sweep Forest Hills.