Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cap & Crown Across Corona
If your chimney crown is cracking or the cap has rusted through, we handle cap and crown work for Corona homeowners before the next freeze-thaw cycle does more damage. We know the blocks here: the tight frame two- and three-families along 108th St and near Roosevelt Ave, where one brick stack often carries several flues and roof access takes real care. Our technicians have up to 8 years of experience working on that kind of older masonry. Nothing gets recommended until you’ve seen the camera evidence yourself. Call (855) 410-4917 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Corona Homeowners Call Chimney Sweep Forest Hills for Chimney Cap & Crown
Corona chimneys are old, and the field is full of companies that will tell you a crown is failing before anyone has actually looked at it. That’s the pattern we hear about most in this neighborhood, and it’s the one we work against. A cap or crown decision here has to be based on what the masonry and the flue interior show on inspection day, not on what a sales pitch assumes.
We’re a chimney and fireplace specialty contractor, so cap and crown work sits alongside sweeping, inspection, structural chimney repair and fireplace repair rather than standing alone. When we go up on a Corona roof, we can read the whole stack: shared masonry, adjoining flues, and the crown carrying all of it. Our technicians have up to 8 years of experience, and we work with professional-grade materials like Gelco and Famco caps that hold up through damp winters and humid summers. Serving Corona means knowing how these early-1900s houses are built, and pricing the job honestly from what’s actually there.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Cap & Crown Services in Corona
Cap Installation
A cap keeps rain, animals and debris out of the flue, and in Corona’s humid climate that matters more than most homeowners expect. We fit single-flue and custom caps to the exact dimensions of your stack, with the screen sized for the appliance you’re venting. On the older homes along the blocks off Roosevelt Ave, the chimney often never had a proper cap at all, and the interior damage shows it.

Cap Replacement
Galvanized caps rust out faster here than stainless, especially with the freeze-thaw swings between cold winters and humid summers. We swap failed caps for stainless or copper units sized to the flue, checking the crown and flashing at the same appointment. If one unit in a shared stack has had its cap replaced, the others may still be exposed, and we look at all of them before recommending anything.

Crown Repair
The crown is the concrete or mortar cap on top of the chimney that sheds water away from the masonry. When it cracks, water gets in, spalls the brick and works down toward the flues. We rebuild failed crowns with proper slope and overhang so they drain, which is the detail most original Corona crowns are missing.

Crown Coating
When a crown is sound but showing surface cracking, a flexible coating can seal it without a full rebuild. We use HeatShield crown coating materials formulated to move with the masonry through seasonal temperature swings. It’s a repair option worth considering when the structure is still intact, and we’ll tell you plainly when a crown has gone too far for coating to help.
Multi-Flue Caps and Custom Caps
On a shared Corona stack, a single-flue cap leaves the neighboring flues wide open. We build custom multi-flue caps and full-coverage covers sized to the whole chimney so every flue in the stack is protected at once. This is the piece most unit-by-unit fixes miss.
Trusted Brands We Service in Corona
Our cap and crown work uses materials we know well: Gelco and Famco caps and covers, HeatShield for crown repair and flue resurfacing, and Olympia Chimney flexible liner systems when a crown repair uncovers a flue problem underneath. These are professional trade brands that general handymen don’t carry. We don’t claim to stock parts or run trucks out of a Corona address. What we offer is the right product specified for your chimney and a fast turnaround once the scope is confirmed. If a brand you have questions about isn’t listed, ask us and we’ll tell you honestly whether we work with it.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Cap & Crown Problems We See in Corona Homes
These are the failures that come up again and again on Corona’s older chimney stacks:
- Deteriorated clay-tile flues and mortar joints. Original clay liners with worn joints let water infiltrate the masonry, which spalls brick and cracks the crown after a few freeze-thaw cycles. Once that moisture is inside the stack, the damage moves faster than most homeowners expect.
- Single-flue caps on multi-flue stacks. A cap fitted to one flue leaves its neighbors uncovered, so a cap replacement on one apartment doesn’t protect the shared chimney at all. This is the most common wasted repair we see on Corona’s two- and three-family blocks.
- Oil-to-gas conversions vented into unlined stacks. Acidic flue gases from a converted appliance eat mortar and crown from the inside out, and the damage stays hidden until a camera inspection finds it. Nothing shows on the roofline until the masonry is already failing.
- Cracked crowns on tightly spaced rowhouses. The narrow gaps between adjoining roofs along streets like 108th St mean a failed crown on one house can send water toward a neighbor’s masonry, and creosote risk from an adjoining flue is a real concern on these blocks.
Pricing for Chimney Cap & Crown in Corona, NY
Pricing for cap and crown work in Corona is set per job from a written estimate, and the estimate is free. A typical cap installation on a single flue in Corona runs $250 to $550, depending on cap material and flue size. A custom multi-flue cap for a shared stack usually runs $550 to $1,200. Crown repair with proper slope and flashing typically runs $400 to $900, and crown coating on a sound crown runs $250 to $500. What moves the number is access, stack height, and whether the crown needs a rebuild or just a seal. On the tight side yards and party-wall lots common here, staging takes more care. Call (855) 410-4917 for a free estimate.
We Also Serve Cities Near Corona
Our cap and crown work covers Corona and the neighborhoods around it, including Elmhurst, Rego Park, Forest Hills and Middle Village. The housing stock and climate concerns are similar across these areas, so the approach carries over. If you’re just outside Corona and want to know whether we reach you, call and ask.
Serving Corona, NY – Our Local Coverage Area
We serve Corona and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Cap & Crown in Corona
No. A single custom multi-flue cap covering the whole stack protects every flue at once and is usually the better choice on a shared Corona chimney. A separate cap on each flue leaves gaps where water can still reach the shared masonry, and it costs more in the long run. We measure the full stack before specifying the cap. Call (855) 410-4917 for a free estimate.
Water staining on the ceiling near the chimney, crumbling mortar visible from the ground, or brick spalling on the stack are the usual signs. None of them confirm a crown failure by themselves, so the real answer comes from an inspection. We photograph what we find so you can see it for yourself. Call (855) 410-4917 to book an inspection.
On a Corona multi-flue stack, each flue serves a separate apartment, and they’re rarely in the same condition. One flue can be clean while the neighboring flue is heavily glazed, and the shared masonry holds the problem for both. A building-wide assessment catches the difference; a single-unit sweep won’t. Call (855) 410-4917 to have all the flues looked at together.
Yes. Corona’s cold, damp winters and humid summers drive freeze-thaw cycles that crack aging crowns and spall brick, and an open flue lets that moisture straight in. A properly fitted cap is the cheapest protection against the most common type of chimney damage here. It also keeps out birds and debris that cause blockages. Call (855) 410-4917 for a free estimate on a cap sized to your stack.
Crown repair rebuilds a failed crown with new mortar and proper slope; crown coating seals a sound crown that’s showing surface cracking. Coating is faster and less expensive, but only works when the crown structure is still intact. We tell you which one your crown actually needs after inspecting it, and we say so plainly when repair can safely wait. Call (855) 410-4917 to book the inspection.
If your Corona chimney needs a cap, a crown repair, or just an honest look before the next winter, call us at (855) 410-4917. The estimate is free, the price is set per job by the written estimate, and nothing gets recommended without camera evidence you can see for yourself. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Forest Hills.