Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning Cost in North Hills?
Chimney cleaning in North Hills typically costs $180 to $320 for a standard sweep of a single wood-burning flue, and $320 to $650 when the flue has heavy creosote, a liner that needs to be worked around, or when the job includes a Level 2 camera inspection. Most homes here sit at the lower end, because the bulk of the housing stock in North Hills runs on gas, which keeps soot and creosote low and sweeps quick. For a wood-burning fireplace that sees regular winter fires, plan on the higher end of that range and get it looked at once a year.
Chimney Cleaning Cost Breakdown (2026)
Here’s how the line items break down for the North Hills market. Every range below reflects what a chimney specialty contractor charges per job, and the written estimate sets the final price.
| Service | Typical Price Range (2026) | What It Covers |
|---|---|---|
| Standard chimney sweep (wood-burning) | $180 – $320 | Rod-and-brush cleaning of the flue, smoke chamber, and firebox; soot and creosote removal |
| Gas fireplace flue cleaning | $140 – $240 | Lower-residue cleaning of a gas flue, venting check, and termination inspection |
| Heavy creosote removal (Stage 2 or 3) | $400 – $850 | Aggressive cleaning when glaze or hardened creosote has built up; may require chemical treatment |
| Level 1 inspection (add-on to sweep) | $60 – $120 | Visual read of the firebox, damper, and accessible flue |
| Standalone Level 2 camera inspection | $180 – $380 | Video scan of the full flue, including offsets and the crown; documented report |
| Chimney cap installed (Gelco, Famco) | $200 – $450 | Stainless or powder-coated cap sized to the flue; weather and animal exclusion |
| Crown repair or rebuild | $350 – $900 | Mortar repair or cast crown where water intrusion has cracked the top |
| HeatShield flue resurfacing | $1,200 – $2,800 | Resurfacing worn tile joints without demolition; a repair option when the flue is intact enough |
| DuraFlex / Olympia liner installation | $2,200 – $5,500 | Flexible stainless liner for a compromised flue or a converted appliance; sized and insulated to the system |
| Fireplace repair | $250 – $1,200+ | Damper, firebox brick, mortar joint, and grate issues; scope varies with what fails |
What drives the price up in North Hills is mostly creosote severity and the condition of what’s inside the flue. A swept gas flue is a fast job. A wood-burning chimney with a clogged smoke shelf, a warped damper, or glazed creosote standing on the tile takes hours longer and needs a different set of tools. Older homes on the larger lots around the North Hills Country Club side often have masonry chimneys with an outside footprint and a prone-to-crack crown, so the estimate can shift the moment we get a camera up there and see the liner situation. On the lower end, a straightforward single-flue sweep with a clean cap and an accessible damper sits right at the bottom of the range. Prices do not go up for a same-day or a rushed booking; the estimate is the estimate.
What Affects Chimney Cleaning Pricing in North Hills
Five factors move the number most on a North Hills chimney job:
- Creosote stage. Stage 1 soot brushes out easily and sits in the low end of the sweep range. Stage 2 and Stage 3 glazed creosote is dense, sometimes glassy, and requires chemical treatment and extra passes, which puts the job in the heavy-creosote band. Wood-burning homes in North Hills that burn a lot during the long heating season tend to fall here sooner rather than later.
- Fuel type and appliance. A gas flue sweeps quicker and cheaper because there’s little residue to remove. A converted appliance or a wood insert often changes the flue geometry, which means a camera scan is honest practice and shows up as an added line.
- Number of flues. Any chimney with two flues (a fireplace and a boiler, for instance) is priced twice the work. The per-flue charge is real, and North Hills homes with an original fireplace plus a separate flue commonly need both inspected.
- Access and roof pitch. A tall masonry chimney that sits on a steep roof pitch takes longer to reach safely and set up on. Access is a labor line, not a separate fee. It shows up in the total.
- What the sweep uncovers. A cracked crown, a missing or rusted cap, spalling brick, or a deteriorating liner joint are common findings on older North Hills chimneys. Each gets priced on its own line so you can see it and decide. The inspection report tells you exactly what your chimney needs, and what it doesn’t.
- Whether the job is bundled. A sweep plus a Level 2 inspection plus a new Gelco or Famco cap is one visit and one travel cost, so the bundled total runs below three separate trips. Pricing is per job, not per item, and the written estimate reflects it.
How to Save on Chimney Cleaning
There’s not much fat to cut on a sweep; the costs are fairly tight. What you can do is avoid paying twice.
- Get the cap right the first time. A properly fitted Gelco or Famco cap keeps rain, snowmelt, squirrels, and birds out of the flue. That cuts creosote-adjacent moisture damage and removes the leading reason chimneys get re-swept ahead of schedule. At $200 to $450, it’s cheaper than the crown repair it prevents.
- Pair the sweep with the inspection. A Level 1 visual is $60 to $120 as an add-on. Pulling it out of the sweep into a separate trip costs more in the long run, and it’s the same visit.
- Sample the chimney schedule you actually need. A gas flue can often go longer between cleanings than a wood-burning flue. Ask what your specific setup needs instead of following a default annual script.
- Fix the small stuff before it grows. A hairline crack in the crown is a $350-ish repair. Left through a full North Hills freeze-thaw cycle, it feeds water into the masonry and turns into a rebuild. HeatShield resurfacing in the $1,200 to $2,800 range can rescue a flue with worn joints that would otherwise need a full liner at the top of our range.
- Ask for the estimate in writing before work starts. Our estimates are free. Call (855) 410-4917 and get the number in hand.
What’s Included in a Standard North Hills Chimney Sweep?
A standard sweep covers more than running a brush up the flue. It’s the rod-and-brush cleaning of the full flue, the smoke chamber, the smoke shelf, and the firebox, plus soot and creosote removal down to the damper. We use drop cloths and a HEPA vacuum setup so the room stays clean, and we bag the debris for removal off-site. When the cleaning is done, we inspect the accessible components: the damper operation, the firebox brick and mortar, the flue tile as far as the eye can see, and the cap and crown from up top or from the ground depending on access.
That last step is where a sweep becomes more than a sweep. When we find a problem, you get a written scope for it, and we can fix it. We work on the whole system, not just the visible soot. That’s why our scope covers sweeping, inspection, cap and crown work, structural chimney repair, and fireplace repair under one contractor. We’re authorized to work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, the same professional-trade brands chimney specialists specify. General handymen don’t carry them. That matters most when the sweep turns up a worn liner: with chimney sweep forest hills as our guide, we’re set up to resurface with HeatShield or install a DuraFlex or Olympia flexible liner to bring an older flue up to code. Our technicians have up to 8 years of experience working on both sides of that call.
Chimney Sweep vs. Chimney Inspection: What Are You Paying For?
A sweep cleans. An inspection documents. Both get done on most visits, but they’re different jobs and they’re priced separately on the estimate when a homeowner wants to see the split.
The inspection matters most when the stakes are high: buying or selling a home, after a chimney fire, after a new appliance has been connected, or when you’ve never had the flue looked at. We offer inspection as a standalone service. It’s not a checkbox on a sweep invoice. The report includes a video scan of the flue from the firebox to the top, a look at the crown, the cap, the smoke chamber, and the visible exterior masonry, and a written summary of what’s fine and what isn’t. New buyers in North Hills often order one before closing, and sellers order one to show a clean bill of health. Either way, the report is what the parties review, not a verbal “looks good.”
Does Chimney Cleaning Cost More for a Wood-Burning Fireplace?
Yes, on average. A wood-burning sweep runs $180 to $320 and a gas fireplace flue runs $140 to $240, because wood leaves soot and creosote behind while gas leaves far less. That said, the gap narrows when a wood-burning chimney is on a regular cleaning rhythm and the creosote stays at Stage 1. The gap widens sharply when it’s been neglected and the creosote has glazed. A glazed flue in the $400 to $850 heavy-creosote band costs more than a gas sweep plus an inspection combined.
If you burn wood through the winter in North Hills, the right question isn’t how often to sweep but how well you burn. Seasoned wood, a hot fire, and an open damper reduce creosote buildup. Dry wood that’s been split and stacked for a season burns cleaner and leaves less behind. When the sweep is routine and the burn habits are good, the annual cost stays near the bottom of the range.
Is It Cheaper to Repair or Replace a Chimney in North Hills?
Repair is almost always cheaper than replacement, and in North Hills the repair path is often wider than homeowners expect. A compromised flue with worn tile joints can be resurfaced with HeatShield at $1,200 to $2,800 rather than demolished and rebuilt. A flue that’s lost integrity entirely gets a DuraFlex or Olympia flexible liner at $2,200 to $5,500, still well below the cost of tearing a masonry chimney down and rebuilding it. Crown repair at $350 to $900 is one of the highest-value fixes on the list; a failing crown lets water into the masonry, and that water is what drives the big structural numbers.
Full masonry replacement only becomes the right answer when the structure itself has failed beyond what a liner or resurfacing can address. That’s rare. Before that point, the inspection report is what tells you which path you’re on. From cap to firebox, one company, one call. We handle the sweep, the diagnostic, and the repair. That keeps the scope honest and the price transparent, and you don’t need to call a second contractor when the sweep finds something bigger.
FAQs – Chimney Cleaning Cost
How much does a chimney sweep cost in North Hills in 2026?
A standard sweep in North Hills runs $180 to $320 for a wood-burning flue and $140 to $240 for a gas fireplace flue. Heavy creosote, a second flue, or a liner that needs to be worked around pushes the job into the $400 to $850 range. Call (855) 410-4917 for an exact quote. Estimates are free.
Does chimney cleaning cost more in the winter in North Hills?
No, the price is the same through the heating season as in the off-season. What does change is demand: North Hills chimneys get busy in the fall and winter, so schedule ahead. The written estimate sets the final price regardless of when you book. Call (855) 410-4917 to lock in a slot.
Can you clean my chimney and install a cap in one visit?
Yes. We install Gelco and Famco caps as part of a sweep appointment, which saves a second trip. A cap runs $200 to $450 depending on the flue size and the material. Bundling it with the sweep keeps the total below two separate visits. Call (855) 410-4917 for a combined estimate.
How do I know if my North Hills chimney needs a sweep or an inspection first?
If you burn wood, start with a sweep; a Level 1 inspection is $60 to $120 as an add-on. If you’re buying or selling a home, or the flue hasn’t been looked at in years, order the standalone Level 2 inspection at $180 to $380 first. Either way, the report tells you what’s needed. Call (855) 410-4917 to book.
Why does my chimney cleaning cost more than my neighbor’s?
Because creosote stage, flue count, roof access, and the condition of the flue are all different. A clean single-flue sweep sits at $180 to $320; a neglected two-flue chimney with glazed creosote can run $400 to $850 before any repairs. The written estimate is the real number. Call (855) 410-4917 for yours, free of charge.
Book Your North Hills Chimney Cleaning
If your flue hasn’t been cleaned this season, or you’ve never had a proper inspection on the chimney, call (855) 410-4917. We answer 24/7, and we dispatch fast from 7am to 7pm, Sunday through Friday. Estimates are free, the price is set per job in writing, and the same team that sweeps the chimney can fix a cracked crown, install a Gelco or Famco cap, resurface the flue with HeatShield, or line a failing chimney with DuraFlex or Olympia on a single scope. The local pro we connect you with is licensed and insured as their state requires.
We’re closed on Saturday. If your chimney needs attention Sunday, call and we’ll book it.
Pricing reflects the North Hills market as of 2026. Chimney Sweep Forest Hills offers free estimates – call (855) 410-4917.
What Our Customers Say
"He explained what went wrong in plain English, showed me the old part, and didn't make me feel stupid for asking why twice. My dad was a contractor and he would have liked this guy."
- Reggie Hampton"Asked a lot of questions before he came out, which I thought was a good sign. Turned out he was right about what the problem probably was, so it was a quick fix once he got here."
- Marisol Mendoza"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Carrie Miller