Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Richmond Hill
Chimney repair in Richmond Hill, NY typically runs $450 to $3,500 for most masonry work, though a full stack rebuild on an older two-family can climb higher. This is a neighborhood where the chimneys are as old as the houses, and the housing is unusually dense: attached and semi-detached brick homes built in the 1910s through the 1930s, many split into two-family units, with stacks that are shared or sit right against a party wall. That density changes how chimney repair works here, because a single address often has several flues serving several tenants, boilers, and water heaters. We handle the whole system, from the crown down to the firebox. Call (855) 410-4917 for a free estimate, and we’ll tell you plainly what your chimney needs and what it can wait on.
Why Richmond Hill Homeowners Call Chimney Sweep Forest Hills for Chimney Repair
Richmond Hill is full of early-20th-century brick and frame houses, and a lot of those chimneys have been capped, abandoned, or half-converted as boilers and gas appliances got swapped out over the decades. Fixing these stacks correctly means understanding what each flue was originally for and what it serves now. That’s the kind of diagnosis we do, and it’s why neighbors in Richmond Hill call us back.
We connect you with independent local professionals who’ve built a strong reputation in the area, and our technicians have up to 8 years of experience reading old masonry. We work with the professional-trade brands certified chimney professionals specify, like HeatShield and DuraFlex liner systems, Olympia Chimney, Gelco and Famco caps, and Copperfield products. Those aren’t the tools or materials a general handyman keeps on hand.
When you call, we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday. The estimate is free, the price for a repair is set per job by a written estimate you approve before we book, and nothing gets recommended that you can’t see the evidence for yourself. Your inspection report tells you exactly what your chimney needs, and what it doesn’t.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Richmond Hill
We work on the whole chimney system, not just the visible soot. On Richmond Hill’s older masonry, the four repairs below come up again and again.
Mortar Repointing
Repointing replaces the crumbling mortar joints between bricks before the wall itself starts to move. On Richmond Hill’s humid, freeze-thaw winters, water gets into hairline cracks in the mortar, freezes, and widens them season after season. Repointing a typical stack in Richmond Hill usually runs $600 to $1,500, depending on how much of the chimney is accessible and how high it sits.

Spalling Brick Repair
Spalling is when the face of a brick flakes and pops off, usually because moisture got trapped inside and pushed out during a freeze. Left alone, spalled brick keeps shedding and the stack loses its structural mass. We replace the failed brick and address the moisture source behind it, so the new work holds. Spot brick replacement in Richmond Hill generally runs $500 to $1,800.

Chimney Waterproofing
A breathable masonry waterproofing treatment keeps liquid water out while letting the brick dry from the inside, which matters on stacks that already show spalling. Waterproofing a Richmond Hill chimney usually costs $350 to $800. It’s the cheapest way to slow the damage a wet, old stack is already showing.

Flashing Repair
Flashing is the metal seal where the chimney meets the roof, and it’s the first place a roof leak shows up around a stack. On Richmond Hill’s dense rows, flashing failures send water down into ceiling joists and shared wall cavities before anyone sees it inside. Flashing repair typically runs $400 to $900.
Trusted Brands We Service in Richmond Hill
We’re authorized to work with DuraFlex and Olympia Chimney flexible liner systems, HeatShield flue resurfacing, and Gelco and Famco caps and covers. These are professional-grade chimney industry products, not the generic hardware-store parts a generalist would use. We don’t stock parts locally and we won’t claim to, but because these are recognized trade brands, we can get the right liner or cap for your stack and turn the repair around quickly. For a Richmond Hill chimney that needs a code-compliant flue upgrade or a proper cap on an abandoned flue, that access to the right materials is what lets a sweep that finds a problem fix it on the same call.
Common Chimney Repair Problems We See in Richmond Hill Homes
- Unsealed abandoned flues in shared stacks. A lot of Richmond Hill two-families still have the old oil flue sitting open and unsealed after the boiler was swapped to gas. When that stack is shared, exhaust from a neighbor’s appliance can migrate into an adjacent unit or a shared wall cavity, which is what produces that kerosene or draft smell in an upstairs room.
- Spalling brick and cracked crowns on early-1900s chimneys. New York City’s freeze-thaw winters and hot, wet summers stress old brick and clay liners. A cracked mortar crown lets water in, and that water degrades the tile liner from the inside and throws off the draft.
- Capped and half-converted flues causing downdrafts. Improperly capped flues from boiler swaps create pressure imbalances. In heating season, old stacks struggle to draft cleanly and homeowners get recurring complaints.
- Flashing failures on tight street frontages. On Richmond Hill’s dense rows, the roof plane around a shared stack is often cramped. Water sneaking past worn flashing shows up inside the nearest unit first, not always the one with the chimney.
The Richmond Hill repair that most often walks through the door
Here’s a scenario that plays out constantly in Richmond Hill’s dense two-family housing. A tenant upstairs calls about a kerosene or draft smell in an upstairs room. The source usually traces to a flue abandoned when an old oil boiler was replaced with a gas unit and never properly sealed. Because the stack is shared or party-wall adjacent, the open flue lets exhaust from a neighbor’s appliance migrate into the adjacent unit. A qualified local pro typically performs a Level 2 inspection to confirm the flue’s condition, then properly seals or relines the abandoned flue with a listed liner system, such as HeatShield resurfacing or a DuraFlex liner, to stop the cross-contamination. That’s the repair we steer Richmond Hill homeowners toward, because capping the wrong flue doesn’t fix the leak.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Richmond Hill, NY
Repair pricing in Richmond Hill reflects the age and density of the housing stock. A typical mortar repointing job runs $600 to $1,500. Spalling brick repair runs $500 to $1,800. Waterproofing usually lands at $350 to $800, and flashing repair at $400 to $900. A chimney rebuilding or partial rebuild, where a section of stack is taken down and rebuilt with matching brick, generally starts around $2,500 and can run to $6,000 or more depending on height and how much of the stack has failed. Tuckpointing runs $600 to $1,400. What moves the number is roof access on a tight row, the height of the stack, whether the flue needs relining at the same time, and how much hidden damage the inspection turns up.
| Repair | Typical Richmond Hill Range |
|---|---|
| Mortar repointing | $600 – $1,500 |
| Spalling brick repair | $500 – $1,800 |
| Chimney waterproofing | $350 – $800 |
| Flashing repair | $400 – $900 |
| Tuckpointing | $600 – $1,400 |
| Chimney rebuilding | $2,500 – $6,000+ |
These are estimates, and the written estimate sets the final price. The estimate is free, the price is agreed before we book, and nothing gets authorized you haven’t approved. Call (855) 410-4917 for an exact quote.
We Also Serve Cities Near Richmond Hill
We take on chimney repair in Richmond Hill and the neighborhoods around it, and we also serve homeowners in Kew Gardens, Forest Hills, Rego Park, and Middle Village. If you’re next door to a shared stack and aren’t sure who’s responsible for the flue, our chimney repair team can sort out the diagnosis and the fix on one call. Call (855) 410-4917 to book a sweep or inspection.
Serving Richmond Hill, NY – Our Local Coverage Area
We serve Richmond Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Richmond Hill
The smell is usually not kerosene at all. In a Richmond Hill two-family, it’s typically exhaust from a neighbor’s gas appliance venting into an unsealed or abandoned oil flue in a shared stack, and it drifts into the adjacent unit. That’s a cross-contamination problem, and the fix is a Level 2 inspection and then properly sealing or relining the flue. Call (855) 410-4917 for an exact quote, and estimates are free.
A chimney professional confirms it with a Level 2 inspection that looks at each flue serving the stack and checks whether any of them is unsealed, abandoned, or improperly connected. The telltale signs are smells in one unit that track the neighbor’s heating schedule. Nothing gets recommended until we can show you the camera evidence. Call (855) 410-4917 for a free estimate.
Repointing grinds out the failing mortar and replaces it with fresh mortar that matches the original brick. Tuckpointing goes a step further, packing a second finish so the joint reads as a crisp line. On early-1900s Richmond Hill stacks, repointing is the usual structural repair, and tuckpointing is the cosmetic finish. Both typically run $600 to $1,500 depending on height and access. Call (855) 410-4917 for a free estimate.
A crumbling crown is not a repair to sit on all winter, because a cracked crown lets water straight into the flue and tile liner. If the crown has lost a whole section, book the repair before the heating season; a hairline crack can be watched and waterproofed, which usually runs $350 to $800. Call (855) 410-4917 and we’ll tell you plainly which side of that line your crown is on. Estimates are free.
Even without a wood fire, have the chimney inspected once a year, because the flues still vent gas appliances and boiler exhaust, and an unsealed shared flue can quietly send exhaust into a neighbor’s unit. On Richmond Hill’s older two-families, an annual inspection catches failing crowns, spalled brick, and abandoned flues before they become a tenant complaint. Call (855) 410-4917 to book an inspection.
Book a Chimney Repair in Richmond Hill
Whether it’s a crumbling crown, spalled brick, a leaking flashing joint, or that kerosene smell in an upstairs room, the work starts with a real diagnosis and a written estimate you can trust. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 410-4917 for a free estimate, and we’ll tell you exactly what your Richmond Hill chimney needs and what it can wait on.
Written by the team at Chimney Sweep Forest Hills.