Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Rego Park
If you’ve spotted crumbling mortar between your bricks, a cracked crown, or smoke that won’t draw right, you’re likely searching for a chimney repair team that actually understands what’s sitting on your roof. We work on chimneys across Rego Park, from the attached brick houses on the numbered streets off Queens Boulevard to the taller prewar buildings near 63rd Drive. Rego Park’s chimneys are older than most of what we see nearby, and that changes how repair is done. The flues, the shared stacks, the mortar mix, the flashing details – all of it needs a technician who has seen this specific housing stock before. Fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 410-4917 to book an estimate.
Why Rego Park Homeowners Call Chimney Sweep Forest Hills for Chimney Repair
We’re a chimney and fireplace specialty contractor, not a general handyman who adds sweeping to the truck. That focus matters in Rego Park, where a repair that looks simple from the sidewalk often turns out to involve a neighbor’s flue, an unlined stack, or a crown that’s been silently failing for years. Our technicians have up to 8 years of experience, and they work with professional-grade materials from brands like HeatShield, DuraFlex, and Gelco – the same products certified chimney professionals specify.
Rego Park customers call us because a sweep that finds a problem can fix it on the same call. We handle the sweep, the inspection, the cap and crown, the structural repair, and the fireplace itself under one contractor. No second company to track down when the inspection turns up cracked tiles. Nothing gets recommended without camera footage you can see with your own eyes, and we’ll tell you plainly when a repair can wait. If you’re buying or selling in Rego Park, our inspection is a standalone service with a documented report you can hand to a buyer or an attorney.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Rego Park
Chimney repair in Rego Park usually means addressing masonry that’s been through too many freeze-thaw winters and flues that were never built for the appliances now venting into them. Here’s where we spend most of our time.
Mortar Repointing
Mortar joints are the first thing to go on Rego Park’s older brick chimneys. Water gets into a hairline crack, freezes, and widens it until the joint crumbles out and the brick above starts to shift. We grind out the failed mortar to a proper depth and repack it with a mix matched to the original 1940s-60s masonry, so the new joint moves with the brick instead of cracking the face.

Spalling Brick Repair
Spalling is when a brick face pops off in a flake or a chunk, usually after water has worked behind it and frozen. On the shared chimney stacks common along Queens Boulevard, a spalled brick on your side can affect the neighbor’s side too, so it needs identifying and matching rather than a quick patch. We replace damaged units with brick that fits the surrounding wall and then correct the water problem that caused the spalling in the first place.

Chimney Waterproofing
Most of the damage we see on Rego Park chimneys started as water. Vapor-permeable waterproofing on the brick faces keeps liquid water out while letting the masonry breathe, which matters in a humid summer climate that traps moisture in the walls. We time this after repointing and crown work, not before, since sealing over a crack just hides it.

Flashing Repair
Flashing is the metal that seals the joint where the chimney meets the roof, and it’s the leak source homeowners blame on the chimney itself. Rego Park roofs sit close together, and a flashing failure on one side of an attached house can send water into a neighbor’s ceiling. We rebuild the flashing with proper step and counter-flashing and tie it back into the roof correctly.
Trusted Brands We Service in Rego Park
Chimney repair lives or dies on materials, and the trade brands we work with aren’t the ones a general handyman picks up at a box store. We’re authorized to work with DuraFlex and Olympia Chimney flexible liner systems, HeatShield for flue resurfacing, and Gelco and Famco for caps and covers, plus Copperfield products where they fit the job. That range means we can reline a compromised flue rather than clean around the problem, and we can match a cap to the chimney’s actual venting needs. We don’t claim to stock parts locally – materials get specified to your chimney and brought to the job. Call (855) 410-4917 for a free estimate.
Common Chimney Repair Problems We See in Rego Park Homes
Rego Park’s attached brick construction and mid-century build dates create repair scenarios you won’t find in a detached suburban house. Here’s what shows up most.
- Shared flue crossover. In Rego Park’s attached brick houses, when both you and your neighbor have the damper open at the same time, smoke from one unit can drift into the other. This almost never happens in detached homes, and fixing it usually means separating the venting with a new liner and coordinating with the adjacent owner.
- Freeze-thaw spalling on crowns and brick faces. Cold, damp winters push water into hairline cracks in the crown and brick, where it expands and pops the surface. A crown rebuild plus repointing and proper flashing is the usual correction.
- Cracked clay tiles after decades of oil-to-gas conversion. Many Rego Park homes switched heating fuel over the years and now vent appliances into an unlined or deteriorating flue that was never designed for the new exhaust. Draft problems and creosote buildup follow, and a camera inspection shows exactly where the tiles have cracked.
- Animal nesting in unused chimneys during humid summers. An uncapped flue becomes a dry, sheltered spot for birds and squirrels, and the nesting material blocks the draft and adds a fire load. A proper Gelco or Famco cap stops the intrusion and the moisture that draws animals in.
See the difference
Before
After
Before
After
Before
AfterWhy Rego Park’s Shared Chimneys Change the Repair Conversation
The single biggest difference between repairing a chimney in Rego Park and repairing one almost anywhere else is the shared stack. In the 1940s-1960s attached brick houses that line so many of these blocks, two units often vent into the same chimney structure, which means your flue tile and your neighbor’s flue tile sit in the same masonry mass. When mortar fails on the shared stack, both sides are affected. When you reline your side to correct a draft or a crossover problem, the scope has to account for what the neighbor’s appliance is doing on the other side of the wall. We’ve learned to walk both sides of the question before quoting, and to explain the coordination a shared stack requires. In a typical Rego Park attached brick house, a homeowner notices crumbling mortar up in the attic or smoke backing into the living room when the furnace runs. A qualified technician performs a Level 2 inspection with a camera and often finds cracked clay flue tiles from freeze-thaw cycles alongside spalling brick on the shared stack. The fix usually means relining with a HeatShield or DuraFlex liner and repointing the mortar joints, but only after the homeowner reviews the footage and approves the scope. That last step isn’t a formality. It’s how you make sure the work you’re paying for is the work your chimney actually needs.
Pricing for Chimney Repair in Rego Park, NY
Chimney repair in Rego Park typically runs from a few hundred dollars for localized masonry work to several thousand when a shared stack needs rebuilding or a flue needs relining. Prices are estimates; the written estimate you get before booking is what sets the final figure.
- Mortar repointing: typically $500-$1,500, depending on how much of the chimney face is involved and how high the work sits.
- Spalling brick replacement: typically $400-$1,200 for localized repair; more when a full course or a shared stack is affected.
- Chimney waterproofing: typically $350-$900 for a standard masonry chimney.
- Flashing repair or rebuild: typically $400-$1,000, driven by roof pitch and access.
- Crown rebuild: typically $500-$1,400.
- Chimney relining (HeatShield or DuraFlex): typically $1,800-$5,000 depending on flue size and length.
- Chimney rebuilding: quoted per job once structural scope is confirmed on camera.
Every estimate is free. We won’t recommend a liner or a rebuild without camera evidence you can see, and we’ll tell you when a repair can safely wait. Call (855) 410-4917 for an exact quote.
We Also Serve Cities Near Rego Park
The same shared-stack and mid-century brick conditions follow us into neighboring areas, and we take chimney repair calls across Rego Park and the surrounding neighborhoods: Forest Hills, Elmhurst, Corona, and Middle Village. If your chimney is one of the older attached-house stacks in any of these, our chimney repair team can inspect and quote the same way we do in Rego Park. Call (855) 410-4917 to book.
Serving Rego Park, NY – Our Local Coverage Area
We serve Rego Park and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Rego Park
You can’t tell from the inside, and neither can your neighbor – only a camera inspection of each flue tells you which side has the cracked tile or failing mortar. In a shared stack, we inspect both flues when access allows and show you footage of your side specifically, so you know exactly what your repair scope is. Call (855) 410-4917 for a free estimate.
You usually can’t see cracked clay tiles from the firebox, and a look down the flue from the roof only shows the top few feet. Freeze-thaw cracking is confirmed with a camera run the full length of the flue. Signs that it’s worth checking now include smoke backing into the room, a draft that’s gotten worse, or visible spalling on the chimney’s exterior. Call (855) 410-4917 to book a camera inspection.
A camera inspection shows the entire interior flue surface, including offset sections and the joints between tiles that a rooftop glance can’t reach. It’s how we find the cracked tile, the gap, or the missing liner that explains the draft problem – and it’s the evidence we show you before recommending any repair. Call (855) 410-4917 for a free estimate.
On a shared stack, the mortar joints run between masonry that serves both units, so repointing has to be done with a mix that behaves the same on both sides and with attention to how the repair affects the neighbor’s venting. Getting it wrong on a detached chimney is a nuisance; on a Rego Park shared stack it can cause cross-drafting or damage to the adjacent flue. We scope shared-stack repointing accordingly. Call (855) 410-4917.
Repointing fixes the outside, but it doesn’t line the flue, and an unlined flue venting a modern appliance is a real risk regardless of how good the masonry looks. That’s the exact scenario where camera evidence matters most: we show you what’s inside the flue before recommending a HeatShield resurface or a DuraFlex liner, and we tell you when no liner work is needed. Call (855) 410-4917 for a free estimate.
Written by the team at Chimney Sweep Forest Hills.