Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Malverne
If you live in Malverne and your chimney is showing its age, you’re not imagining it. This village is full of century-old masonry stacks, and the salt air, nor’easters, and hard freeze-thaw cycles off the South Shore push them harder than chimneys further inland ever face. We work on the whole system, not just the visible soot: crowns, flashing, brick, mortar, and liners. Our technicians have up to 8 years of experience, and when you call (855) 410-4917, we answer 24/7. Fast dispatch from 7am to 7pm.
Why Malverne Homeowners Call Chimney Sweep Forest Hills for Chimney Repair
Malverne is a village where the housing stock tells the story. Most of these homes went up between the 1900s and 1940s, and many still carry their original single-wythe brick chimneys and clay flue tiles. When we get called to a Malverne address, we usually know what we’re walking into before we climb the roof.
We work with professional-grade materials from brands like HeatShield, Gelco, Olympia Chimney, and Famco, and we can take a repair from inspection all the way through relining. One call covers it.
Our technicians have up to 8 years of experience, and we plan our routes so we’re not making you wait through a whole day for a window. A sweep or inspection is booked around your schedule, with fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Repair Services in Malverne
The repair work that comes up most in Malverne isn’t cosmetic. Salt air and storm-driven rain attack the outside of the stack first, and the damage works its way inward from there. Here’s what we handle most.
Mortar Repointing
On the pre-war brick stacks that line the streets off Hempstead Avenue, mortar joints are usually the first thing to go. Years of freeze-thaw cycles leave the joints crumbly and recessed, and once water gets behind the brick face, the whole stack starts to suffer. Repointing replaces that failed mortar with fresh material matched to the original brick, which stops the water intrusion and restores the structural bond.

Spalling Brick Repair
Spalling is what happens when moisture gets trapped in the brick and freezes. The face of the brick pops off, sometimes in sheets. Malverne’s ocean-facing storms drive rain into parged brick surfaces that were never built for that kind of exposure. We replace the spalled units and address the moisture source so the new brick isn’t fighting the same battle.

Chimney Waterproofing
Waterproofing is the single highest-value thing you can do for an old Malverne chimney. A breathable sealant applied to the masonry stops liquid water from soaking in while still letting the brick dry out from the inside. On a stack that’s already been repointed and had its crown replaced, waterproofing is what keeps the repair from failing again after the next nor’easter.

Flashing Repair
Flashing is the metal where the chimney meets the roof, and it’s where most leaks start. The galvanized flashing on many Malverne homes has been quietly rusting for decades thanks to the salt air. We repair or replace it with stainless, which resists corrosion far longer. This is the work that prevents water from tracking down into the attic and ceiling.
Trusted Brands We Service in Malverne
The brands we work with aren’t the ones you’ll find at a big-box store. HeatShield lets us resurface a deteriorating flue without tearing out the whole chimney. Gelco and Famco make the caps and covers that keep rain and animals out. Olympia Chimney’s flexible liner systems handle the flues that need a full reline. These are the products certified chimney professionals specify, and they’re what we bring to a Malverne repair. When a sweep turns up a bigger problem, we can address it in the same visit rather than sending you off to find a second contractor.
Common Chimney Repair Problems We See in Malverne Homes
After enough visits to this village, the failure patterns become predictable. These are the ones that come up again and again.
- Rusted galvanized caps and flashing. Salt air off the Atlantic accelerates corrosion on galvanized metal, and once it rusts through, water finds its way in. Stainless is the fix, and it holds up far better.
- Cracked clay flue tiles. The original tiles from the 1920s crack from thermal stress and decades of boiler flue gases. A cracked liner lets creosote and moisture seep into the surrounding masonry.
- Wind-driven rain past missing caps and crowns. Nor’easters push water sideways into chimneys that were never capped. That water freezes, and parged brick surfaces spall off in chunks.
- Spalling brick and crumbling mortar. Freeze-thaw cycles work on the exposed face of old brick year after year, and failed mortar joints let the damage spread.
Why Malverne’s Chimneys Age Differently
There’s a local condition here that doesn’t show up on a generic repair checklist, and it’s worth explaining because it changes how we approach a job. Malverne’s narrow lots off Hempstead Avenue put chimneys just a few feet from the neighbor’s roofline. When a crown fails or flashing lets go, the water doesn’t always stay on your property. It tracks into a shared party wall, and suddenly a repair that started as your problem is a conversation with the neighbor.
That’s why crown and flashing work on these close-set stacks gets done promptly rather than deferred. A stainless cap and sound flashing protect more than the chimney in front of you. They protect the wall you share.
A typical job on one of these 1920s stacks starts with a Level 2 inspection. From there, a technician repoints the mortar joints, replaces the crown and fits a stainless-steel cap, and upgrades galvanized flashing to stainless to resist the salt air. If the flue liner is cracked, a HeatShield or DuraFlex liner restores safe draft and contains creosote. It’s a sequence that follows the water, from the top of the stack down.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Malverne, NY
Chimney repair in Malverne isn’t one price, because a repointing job and a full reline aren’t the same scope of work. Here are typical ranges so you know what to expect before anyone climbs the roof.
| Repair | Typical estimated range |
|---|---|
| Mortar repointing | $600 – $1,800, depending on how much of the stack is affected |
| Spalling brick repair | $500 – $1,500, based on the number of bricks replaced |
| Chimney waterproofing | $300 – $700 |
| Flashing repair or replacement | $400 – $1,200 |
| Stainless cap and crown | $500 – $1,400 |
| HeatShield or DuraFlex liner | $2,500 – $6,000, depending on flue length and liner type |
These are estimates for the Malverne market, not a quote. Height, access, the number of flues, and how far the damage has spread all move the number. The written estimate you get after inspection sets the final price, and it’s free.
We Also Serve Cities Near Malverne
The same salt-air and pre-war masonry conditions shape chimney work all along this stretch of the South Shore. We also serve homeowners in Franklin Square, Hewlett, Garden City Park, and New Hyde Park, and the repair approach carries over cleanly to each. If you’re outside Malverne but nearby, call and we’ll confirm coverage.
Serving Malverne, NY – Our Local Coverage Area
We serve Malverne and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Repair in Malverne
Once a year is the right interval for a Malverne home with a wood-burning or gas fireplace, and the salt-air exposure here makes that annual check more valuable than it is inland. Corrosion on caps and flashing moves faster in this climate, so an annual inspection catches it before it turns into a leak. Call (855) 410-4917 to book one. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Salt air and wind-driven rain from Atlantic storms attack the metal and masonry on a Malverne chimney harder than they would on a stack ten miles inland. Galvanized caps and flashing corrode faster, and nor’easters force water past missing caps into brick that then freezes and spalls. The exposure is the difference, and it’s why we favor stainless components here.
Third-degree creosote is the hardened, glazed form that bonds to the flue walls and can’t be brushed away. In Malverne’s 1920s homes, cracked clay flue tiles let that creosote seep into the surrounding masonry, where it’s harder to reach and a genuine fire risk. When we find it, the fix is usually a HeatShield resurfacing or a new liner rather than a sweep alone. Call (855) 410-4917 for an assessment. Estimates are free.
Yes, on Malverne’s narrow lots a failed crown can send water into a shared party wall, which is why these repairs shouldn’t wait. Chimneys off Hempstead Avenue often sit just feet from the neighboring roofline, so a leak that starts on your stack can show up on their side of the wall. A stainless cap and sound crown protect the shared structure, not just your home.
HeatShield and DuraFlex are the liners we most often use for Malverne flue repairs, along with Olympia Chimney’s flexible liner systems for full relines. HeatShield resurfacing repairs a deteriorating flue without demolition, which suits the original clay tile in these older stacks. DuraFlex and Olympia handle the flues that need a complete new liner for safe draft. Call (855) 410-4917 for an exact quote, and estimates are free.
Get a Free Chimney Repair Estimate in Malverne
Whether your crown is crumbling, your flashing is rusted through, or you just bought a Malverne home and want to know what the chimney actually needs, we’ll give you a straight answer backed by camera inspection and photos you can see yourself. Nothing gets recommended without evidence, and we’ll tell you plainly when a repair can safely wait. Call (855) 410-4917. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Forest Hills.