Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Inspection Across Richmond Hill
If you own or rent in Richmond Hill, your chimney is probably older than the appliances venting into it. Most of the housing stock here went up in the 1910s through the 1930s, and the flues inside those brick stacks have been through a century of boiler swaps, conversions, and partial fixes. We inspect the whole system, not just the soot you can see, and we tell you plainly what needs work and what can wait. Call (855) 410-4917. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Richmond Hill Homeowners Call Chimney Sweep Forest Hills for Chimney Inspection
Richmond Hill has a particular chimney problem, and it rarely starts with a wood fire. In the converted two-family houses here, the most common defect we find isn’t in the firebox at all. It’s an abandoned boiler flue that was never sealed or relined, letting kerosene or draft odors migrate through shared wall cavities into an upstairs tenant’s room. That’s a different kind of inspection than a standard sweep, and it’s the kind we’re built for.
Our technicians have up to 8 years of experience diagnosing exactly this pattern across the neighborhood, from the two-family rows off Jamaica Avenue to the older detached houses near Lefferts Boulevard. We work with professional-grade materials from HeatShield, Olympia Chimney, Gelco, and Famco, so when inspection turns up a problem, we can fix it on the same call rather than handing you off to a second contractor.
Because inspection is a standalone service, not a checkbox on a sweep invoice, you get a documented report whether or not you hire us for the repair. That matters if you’re buying or selling in Richmond Hill and need a credible assessment for a lender or a buyer.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Chimney Inspection Services in Richmond Hill
Level 2 Inspection
A Level 2 inspection is the right call for most Richmond Hill homes, especially any house that’s changed hands, changed appliances, or been converted to a two-family. It goes beyond what you can see from the hearth, covering the flue interior, the smoke chamber, and the accessible portions of the chimney exterior. On these older masonry stacks, a Level 2 is how we confirm whether an unused flue was actually sealed at the top and bottom, not just capped with a decorative cover.
Camera Inspection
A camera inspection puts a video scope down the flue so you can see what we see: cracked clay tiles, gaps at the smoke chamber, spalling mortar, and any place a flue is open to a neighboring cavity. In Richmond Hill’s shared and party-wall-adjacent stacks, this is the only honest way to tell whether a flue serving your unit is really separated from your neighbor’s. Nothing gets recommended without footage you can watch yourself.
Flue Inspection
Flue inspection is where the abandoned-boiler-flue problem shows up. When an old oil boiler was swapped for gas, the flue it used often stayed open, unlined, and connected to a stack that was never sized for the new appliance. We trace the flue from the appliance connection up through the stack, checking for proper lining and confirming the unused run is sealed, not just covered.
Level 3 Inspection
When a Level 2 or camera inspection turns up something the flue won’t reveal, a Level 3 goes further, including opening access to concealed areas of the chimney. In Richmond Hill’s older brick houses, that sometimes means looking into the attic or wall where a flue passes through, especially where a converted two-family shares a stack. We’ll explain exactly what the Level 3 covers and why it’s needed before anyone picks up a tool.
Trusted Brands We Service in Richmond Hill
We work with a curated set of professional-grade chimney industry brands: HeatShield for flue resurfacing, Olympia Chimney for flexible stainless liner systems, and Gelco and Famco for caps and covers. These are trade products specified by certified chimney professionals, not general handyman stock, and they let us reline or re-cap an older Richmond Hill stack without full demolition. If your inspection points to a liner upgrade, we’ll match the system to the appliance and the flue, and we’ll show you the reasoning behind the recommendation.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Inspection Problems We See in Richmond Hill Homes
Freeze-thaw winters and hot, wet summers are hard on old brick, and Richmond Hill’s housing stock shows it. Here’s what inspection usually turns up:
- Abandoned oil-boiler flues left unsealed after a gas conversion. When an old oil boiler was replaced with a gas unit, the original flue often stayed open and unlined, letting kerosene odors and downdrafts leak into adjacent units through shared wall cavities. This is the single most common call we get in Richmond Hill’s converted two-families, and it rarely involves a wood fire at all.
- Clay tile liners cracked by freeze-thaw and moisture. The hot, wet summers and freezing winters here stress original clay tiles, and cracks open the flue to water and combustion byproducts. Left alone, cracked tiles are a path for carbon monoxide to reach living space.
- Spalling mortar crowns letting water into unlined flues. A deteriorating crown is how water gets into a stack that was never designed for modern appliance venting, and once it’s wet inside, the damage compounds season by season.
- Shared or party-wall-adjacent stacks in converted two-family houses. One flue serving multiple tenants means a single unsealed flue can compromise draft and air quality next door, so the inspection has to map which flue serves whom.
Pricing for Chimney Inspection in Richmond Hill, NY
Inspection pricing in Richmond Hill runs by level and by how deep the flue check needs to go. A typical Level 1 inspection runs $100-$175. A Level 2 inspection, which most older two-family houses here actually need, runs $175-$350. Camera inspection of the flue adds roughly $125-$275 depending on how many flues we’re scoping and access. A Level 3 inspection, which involves opening concealed areas, starts around $350 and goes up with the scope of the work.
Your written estimate sets the final price, and the estimate itself is free. What moves the number is the number of flues at the address, whether the stack is shared, and whether camera access requires opening anything. We’ll quote before we start, and nothing beyond the inspection is recommended without camera evidence you can review. Call (855) 410-4917 for an exact quote on your Richmond Hill address.
We Also Serve Cities Near Richmond Hill
We serve homeowners across Richmond Hill and the surrounding neighborhoods, including Kew Gardens, Forest Hills, Rego Park, and Middle Village. The same older-stack and converted-two-family issues show up throughout these areas, so you’re getting an inspection calibrated to the housing stock, not a generic checklist. If you’re in Richmond Hill or nearby, our chimney inspection team can schedule a visit.
Serving Richmond Hill, NY – Our Local Coverage Area
We serve Richmond Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Chimney Inspection in Richmond Hill
Yes, and it’s the classic Richmond Hill call. A kerosene or draft smell in an upstairs room usually traces back to a flue abandoned when an old oil boiler was swapped for a gas unit and never properly sealed or relined, letting odors migrate through shared wall cavities. A Level 2 camera inspection is how you confirm it and find the gap. Call (855) 410-4917 to get it scoped.
Yes. Most of the chimney problems in Richmond Hill come from non-wood appliances: boilers, water heaters, and gas units venting into flues that were never lined or sized for them. Even an unused flue can leak or introduce draft and moisture issues into adjacent rooms. An inspection confirms every flue at the address is either properly venting or properly sealed. Call us for a free estimate.
A Level 1 covers the readily accessible portions of the chimney and is fine when nothing has changed. A Level 2 goes further, into the flue interior and smoke chamber, and it’s what you need after a home sale, an appliance change, or a conversion. Given how many Richmond Hill houses have been converted, the Level 2 is usually the right call. We’ll tell you which one your address needs before we quote.
Yes. A camera inspection runs a video scope down the flue so we can see the liner, the smoke chamber, and any place the flue is open to a neighboring cavity or the top of the stack. That footage is what you should demand before approving any liner or relining work. We show it to you and explain what it means. Call (855) 410-4917 to book a camera inspection.
Whichever unit is experiencing the problem should start the inspection, and we map which flue serves which unit during the visit. In Richmond Hill’s party-wall-adjacent stacks, a single unsealed flue can compromise draft for a neighboring tenant, so the inspection has to trace each flue to its appliance. That gives both sides a clear picture before any repair is agreed.
If you’re in Richmond Hill and your chimney hasn’t been looked at since the last appliance swap, that’s the gap to close. We inspect, show you the evidence, and fix what’s actually broken, using HeatShield, Olympia Chimney, Gelco, and Famco materials where the work calls for it. Call (855) 410-4917 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Forest Hills.